Music tut...

Supplies Used:

Jan tube by Screaming Demons. Get it at SATC.

Back to Black kit by Bibi's Collection. Get it at SATC.

Eyecandy 4000 Gradient Glow

Font: Minister #1

Open a new image size 500 by 500.

C/P Element 112. Resize by 60%.

Use your magic wand tool to select the inside of the frame.

Add a new raster layer under the frame layer.

Flood fill with  #b70021.

Add another new raster layer.

C/P Paper 13 into selection.

Deselect.

Change the layer property of the paper to Hard Light.

Dropshadow frame.

C/P Element 16. Dropshadow.

Position just above the middle of the right side of the frame.

C/P Element 128. Resize by 30%. Dropshadow.

Position over the bottom of the speaker.

C/P Element 136. Resize by 50%. Dropshadow.

Use your deform tool to position under the left side of the drums.

C/P Element 135. Resize by 50%. Dropshadow.

Position over the bottom legs of the drums.

C/P Your tube.

Dropshadow.

Position over the left side of the frame.

Type out your font.

Apply Gradient glow of 3 in black.

Add inner bevel of choice.

Repeat gradient Glow.

C/P Element 4. 

Apply Gradient Glow of 3 in  #b70021..

Resize by 75%. Dropshadow.

Use your deform tool to position over the top right corner.

Select your background layer.

C/P Element 23. resize by 50%. Dropshadow.

Position under the right side of the frame.

Duplicate & Mirror.

Don't forget your copyright & Watermark.

Cut Throat Bitch tut..

Supplies Used:

Cut Throat Collab by Screaming Demons & Sky Scraps. Get it at SATC.

Filters: Eyecandy 4000 Gradient Glow & Chrome

Font: Cold Night For Alligators.

Texture of choice

Open a new image size 500 by 500.

C/P Frame 8. Resize by 75%. (Depending om your tube you may want to use your deform tool to pull in the sides of the frame. I have done that for this tag)

Using your magic wand select the inside of the frame. Selections, Modify, Expand by 2.

Add a new raster layer. Flood fill with a blood red color. Select your texture and flood fill the texture in black.

Deselect. Move below the frame layer. Dropshadow frame.

C/P Element 39. Resize by 50%. Dropshadow. Position over your frame.

C/P Your tube. Dropshadow. (I erased the bit of the frame over the knife)

C/P Element 48. Resize by 50%. Position over the left side of the frame. Dropshadow. Duplicate and mirror.

C/P Element 33. Resize by 20%. Dropshadow. Position slightly over the circle on the left side of the frame.

C/P Element 31. Resize by 20%. Dropshadow. Move below the skull. Duplicate and position one higher than the other.

C/P Element 45. Resize by 20%. Dropshadow. Position just slightly over the bottles.

C/P Element 51. Resize by 20%. Dropshadow. Position so the right corner is under the skull candle.

Duplicate grave and move slightly up and left. You want the book to fill the space at the bottom of this grave.

C/P Element 12. Resize by 30%. Dropshadow. Use your deform tool to position on a slight angle above the grave.

Duplicate ankh. Mirror and position under the other grave.

Select your background layer. C/P Element 14. Resize by 50%. Use your deform tool to position so the bottom is under the rest of the elements. Dropshadow. Duplicate and mirror.

C/P Element 7. Resize by 50%. Dropshadow. Position under the right edge of the frame.

C/P Element 19. Resize by 50%. Adjust, Color Balance, Manual Color Correct. Source set to white, Target to blood red. Position over the blood drops.

Duplicate element and resize by 50% again. Duplicate and position both around the original.

C/P Element 1. Resize by 50%. Use your deform tool to position over the filmstrip background on the right. Apply Gradient Glow of 3 in black. Dropshadow.

Type out your font. Duplicate font. On your top layer apply Eyecandy 4000 Chrome. Change the layer property to Luminance L.

On your original font apply Eyecandy 4000 Gradient glow of 3 and dropshadow.

Don't forget your copyright and watermark

Sweet & Deadly tut...

Supplies Used:

Hotrod Betty tube by Screaming Demons. Get it at SATC.

Sweet but Deadly kit by Inzpired Creationz. Also available at SATC.

Mask of choice

Eyecandy 4000 Gradient Glow

Font: Beynkales Demo

Open a new image size 500 by 500.

C/P Frame 3. Resize by 75%.

C/P Box. Resize by 30%. Position under frame and erase any bits that overlap the box.

C/P tube and position on the box. Add Dropshadow.

C/P Crates. Resize by 50%. Use your eraser to remove any of the frame that hangs over the crate.

C/P Kitty 3 With Jewelry. Resize by 15% and position sitting on one of the crates.

C/P Motorcycle.  Resize by 40% and mirror. Position just under the top heart of the frame. Erase any bits of frame over the bike.

C/P Cocktail Glass. Resize by 20%. Duplicate and position down the side of the large heart.

C/P Bottle. Resize by 20%. position between the cocktail glasses.

C/P Wallet. Resize by 30%. Position over the bottom of the large heart.

C/P Heel. Resize by 20%. Mirror and position over the wallet.

C/P Whip 1. Resize by 30%. Position with the handle just under the heel.

C/P Whip 2. Resize by 30%. Flip, Mirror, and position so the feather stick out from behind the wallet.

C/P Heart Doodle. Resize by 20% and position over the silver heart.

Select your background. 

C/P Paper 4 as a new layer. Add your mask and merge group.

Type out your font. Add inner bevel of choice.

Add Gradient Glow...

Add drop shadow.

Don't forget your copyright and watermark

SteamPunker...

Supplies Used:

SteamPunker tube By Screaming Demons. Get it at SATC.

Kit called Steampunkers by Inzpired Creationz. This kit was made to compliment this tube!! You can also get this at SATC.

Eye candy 4000 Chrome & Gradient Glow

Font: SinGothic

Open a new image size 500 by 500

C/P Frame 3. Resize by 65%.

Use your lasso tool to select all the way around the frame. Add a new Raster layer. C/P paper 3 into selection. Deselect and move below the frame layer.

C/P your tube. Use your eraser to remove any bits that stick out over the frame. 

C/P Hat Pin. Resize by 40%. Use your deform tool to position about halfway up the right side of the frame. 

C/P Umbrella 1. Mirror. Resize by 50%. Position over the stick portion of the hatpin.

C/P Luggage. Resize by 40%. Position at the bottom of the umbrella handle. Duplicate 2 times. Change the layer property on the duplicates to multiply.

C/P Shoes. Resize by 30%. Position to the right of the luggage.

C/P Hat. Resize by 30%. Position to sit on top of the luggage. Duplicate and change layer property to multiply.

C/P phone. Resize by 30%. Position to the left of the luggage.

C/P Clock. Resize by 40%. Move under the phone layer.

C/P Hatpin. Resize by 75%. Use your deform tool to position under the clock.

C/P Chain. Resize by 65%. Position over the top left of the frame.

C/P Butterfly 3. Resize by 10%. Position to sit on the umbrella.

Type out your font and duplicate. On the original add Eye Candy 4000 Chrome.

Then a Gradient glow of 3.

On the top layer change the layer property to overlay.

Dont forget your copyright and watermark :)

October Rust tut...

Supplies Used:

October tube by Screaming Demons available at SATC.

October Kit by Pimp'd Designs. You can buy this kit individual or get the bundle HERE (I have written a tut for November before :)

Fonts: Pixelette and Sanctuary

Filter: EyeCandy 4000 Gradient Glow & Mura's Meister Copies

Open a new image size 500 by 500.

C/P Frame 3. Resize by 55%.

Use your magic wand tool to select inside the frame. Selections, Modify, Expand by 5.

Add a new raster layer.

C/P Paper 5 into selection.

Deselect.

Type out your text with the pixelette font size 10. 

Apply Mura's Meister copies with these settings...

 Use your selection tool and select around the frame. Selections Invert, Delete on the copies layer.

Add Gradient Glow of 3.

Add dropshadow to words.

Dropshadow frame.

C/P Thorns. Resize by 65%. Image, Rotate, 90 Degrees. Make sure all layer is unchecked.

Position so the thorns run up the side of the frame. Use your eraser or lasso tool to remove the 2 vines that are separate from the rest. Remove anything that goes past the frame as well. Add dropshadow.

C/P Tombstone. Resize by 35%. Add dropshadow. Position about halfway up the left side of the frame. Duplicate and use your deform tool to position.

C/P Candles. Resize by 35%. Add dropshadow. Duplicate, Mirror and move to position.

C/P Skull. Duplicate and change the layer property to multiply. Merge down. Resize by 25%. Dropshadow. Duplicate, Mirror, And position.

C/P Leaf. Resize by 15%. Duplicate a few times and position around the skulls. For the darker leaves duplicate the leave you want dark and change the layer property to multiply.

C/P Flower 3. Resize by 15%. Duplicate several times and position along the bottom of the frame.

C/P Flower 2. Resize by 15%. Duplicate a few times and position over the black flowers.

Type out your text for the top of the frame using the pixelette font.Add Gradient Glow of 3 and drop shadow.

Type out your name with the Sanctuary font. Repeat Gradient glow and drop shadow.

Don't forget you copyright and watermark.

SteamPunk Symphony Tut...

 

Supplies used:

Steampunker tube by Screaming Demons. Get it at SATC 

Steampunk Sass kit by A Tagger's Scrap. Get it at SATC 

Filters: Eyecandy 4000 Gradient Glow and HSB Noise

Font: High Society

 Mask By Staci (Whateva Mask 1) Get is from Creative Misfits HERE

Open a new image size 600 by 600.

C/P Frame 5. Resize by 75%.

Use your magic wand to select inside both sides of the frame. Selections, Modify, Expand by 5. 

Add a new raster layer. C/P Paper 11 into selection. Deselect and move under the frame.

Dropshadow frame.

C/P Tube. Use your eraser to remove any bits that hang over the frame. Add Dropshadow.

Type out the test for the base of the frame. (Or go down one post and just use my wordart :)

Add Eye candy 4000 Chrome...

Then go to Adjust, Color Balance, Manual color correction...

Then Eye Candy 4000 HSB Noise...

Go to Effects, 3D Effects, Inner Bevel...

Then Gradient Glow....(I used a light color from the top of the tube)

Add Drop Shadow of Choice.

Repeat Gradient Glow in a dark color (I used on of my flower elements)

Repeat drop Shadow.

C/P Bow 8. Resize by 75%. Position over the corner of the frame so it hangs down the side. Add Dropshadow.

C/P Floral 2. Resize by 50%. position at the bottom of the frame and add dropshadow.

C/P Floral 1. Resize by 75%. Position over Floral 1 and dropshadow.

C/P Hatbox. Resize by 40%. position under the floral layer so your lid peeks out from behind them. Dropshadow.

C/P Candle. Resize by 30%. Position at the bottom of Floral 1 and add dropshadow.

C/P Heart. Image, Mirror. Resize by 75%. Position under both Floral elements and add dropshadow.

C/P Butterfly 4. Image, Mirror. Resize by 30%. Add Dropshadow and position on the bottom flower of Floral 2.

Select your background layer. Go to selections, Select all.

Add a new raster layer and C/P Paper 20 into selection. Deselect.

Open your mask. Layers, New Mask Layer, From Image. Source Luminance checked. Invert mask unchecked.

Go to layers, Merge Group.

Duplicate mask. Images, Rotate, Free Rotate, 90 Degrees all layers unchecked.

Don't forget your copyright and watermark.

Add your name using the same steps from the font above.

Hope you enjoyed this tut...I would love to see results.

SteamPunk Symphony Wordart

Ok so if you check out my tut with the same name I explain the steps I took to get this look. You could always just grab it and the not have to follow the tut steps LMAO. Hope ya like it.

(Click for full size...Right Click to save)

Irish Knockout tut...

Supplies Used:

Oi Irish tube by Screaming Demons. Get it at SATC.

Irish Charm Scrapkit by Broken Dreams Scraps. Also available at SATC

Template 130 by my wonderful friend Leah. Get it at Amy & Leah's Gimptastic Tuts.

Font: Velvenda Cooler

Filters: EyeCandy 4000 Gradient Glow and Glass.

Open up template #130.

Delete the copyright and background layers.

I changed my canvas size to 800 by 800 so I had room to work.

Select Circle #3. Selections, Select all. Add new raster layer and C/P Paper 10 into selection. Deselect and delete the original circle.

Select Rectangle #2. Add new raster layer and C/P Paper 9 into selection. Deselect and delete the original rectangle.

Select Rectangle #1. Add new raster layer and C/P Paper 8 into selection. Deselect and delete the original rectangle.

Select Square 2. Add new raster layer and C/P Paper 6 into selection. Deselect and delete the original Square.
 Select Square 1. Add new raster layer and C/P Paper 2 into selection. Deselect and delete the original Square.
  Select Circle 1. Add new raster layer and C/P Paper 1 into selection. Deselect and delete the original Circle.
 Select Circle 2. Add new raster layer and C/P Paper 1 into selection. Deselect and delete the original Circle.
 C/P Your tube. Use your eraser to remove  any bits of the frame/tube that are excess. Dropshadow both.
C/P Element 49. Resize by 50%. Position along the top of the rectangle one layer. Use your eraser to remove any excess.
Duplicate and position at the bottom of rectangle 1.
Duplicate. Image, Rotate, Free rotate. 90 Degrees right. Position along one side of Rectangle one. Duplicate and mirror.
Merge all the ribbon layers together. Add drop shadow.
C/P Element 13. Resize by 50%. Position under one side of the squares. Add Glass...

Duplicate and mirror.
C/P Element 55. Resize by 30%. Position just under the edge of the wordart. Dropshadow. Duplicate and move slightly up and over.
C/P Element 1. Resize by 50%. Position just under the edge of the wordart. Dropshadow. Duplicate and move slightly up and over.
C/P Element 50. Resize by 50%. Position under your green beer. Dropshadow.
C/P Element 7. Resize by 15%. Duplicate a few time and position next to the pot of gold.
C/P Element 29. Resize by 50%. Position under pot of gold.
C/P Element 9. Resize by 30%.
C/P Element 19. Resize by 30%.
C/P  Element 51. Resize by 20%. Use the deform tool to position over wordart. Duplicate 2 time. Change Layer property on both duplicates to Multiply.
Select Words 2 Back. Add inner Bevel...

Then Gradient glow...

 Then Dropshadow.

 Select Words 2 and add dropshadow.
 Resize now if you need too :)
Add your copyright and watermark.
Add your font. Repeat Inner Bevel, Gradient Glow, Dropshadow

Drinkin' and Fightin' Tut...

Supplies Used:

Oi Irish tube by Screaming Demons. Get it at SATC

Lucky Clover kit by Rebellious Scraps. Get it at SATC.

Template from 2 Irish Bitches. Get it HERE.

Font: Scrap Cursive

Filter: Eye Candy 4000 Gradient Glow, Glass, And HSB Noise.

C/P Scatter. move to the bottom layer.

Select raster 1. Selections, Select all, Float. Add a new raster layer. C/P Paper 11 into selection. Deselect and delete original.

Select raster 2. Selections, Select all, Float. Add a new raster layer. C/P Paper 9 into selection. Deselect and delete original.

 Select raster 3. Selections, Select all, Float. Add a new raster layer. C/P Paper 10 into selection. Deselect and delete original.

 Select raster 4. Selections, Select all, Float. Add a new raster layer. C/P Paper 6 into selection. Deselect and delete original. Duplicate and change the layer property to multiply.

C/P Crystal Rain. Resize by 50%. Duplicate and mirror. 

On paper 6 layer Selections, Select all, Float, Invert. Back on the crystal rain layer hit delete.

Deslect.

C/P Chain. Resize by 50%. Duplicate and mirror.

Select the top Square layer. Selections, Select all, Float. Add a new raster layer. C/P Paper 12 into selection. Deselect and delete original.

C/P Tube.

C/P Clover Chain. Resize by 50%. Position the the corner of paper 12.

Select raster 6.  Selections, Select all, Float. Add a new raster layer. C/P Paper 7 into selection. Deselect and delete original.

 Select raster 7.  Selections, Select all, Float. Add a new raster layer. C/P Paper 2 into selection. Deselect and delete original.

C/P Irish Beer. Resize by 30%. Duplicate and move up a bit.

C/P Whisky. Resize by 30%. Position over beer.

C/P Necklace. Resize by 30%. I used my deform tool to position so the clover charm landed between the Irish girl words.

Select the Irish Girls words. Add Glass...

and Gradient glow...

Then Dropshadow

Select the Drink word. Add HSB noise...

And Inner Bevel...

Then repeat gradient glow and drop shadow.

Repeat on all the rest of the wordart and your font.

Back on your large Clover add Inner Bevel.

Add your copyright and watermark.

November tut...

Supplies used:

November portion of the Gothic Bundle from HERE. (I suggest getting the bundle but you can buy it individual)

November tube by Screaming Demons. Get it at SATC

Font Sanctuary

Filter (Font only) Eyecandy 4000 Glass and Gradient glow

Open a new image size 500 by 500.

C/P Lace 2. Resize by 50%. Position to one side of your canvas. Duplicate and mirror.

Duplicate. Rotate 90 degrees right. Line up with the top of the 2 vertical ribbons. (If it overlaps use deform or just erase the bit that hangs over)

Duplicate and flip. Line up with the bottom of the vertical ribbons to make a frame.

Layers, Merge visible.

Adjust, Color Balance, Manual color correction. Your source should be the lace, target set to a dark red.

C/P Button 01. Resize by 30%. Adjust hue/Saturation both to 0. Position in one of the corners. Duplicate and change layer property to multiply. Merge down. Duplicate and position 1 in each corner.

Use your selection tool too select all the way around your frame. (I did mine to the very edges but you could always use the magic wand and select only the inside of the frame)

Add a new raster layer. C/P Paper 1 into selection. move under your frame layer.

Dropshadow frame layer.

C/P Print 2. Resize by 50%. Dropshadow. Position over the left side of the background. Duplicate and mirror.

C/P Spiderweb. Resize by 50%. Position so it fits in the corner of the frame. Change the opacity to 60%.

Select your bottom layer. C/P moon. Duplicate and change layer property to screen.

C/P Bats. Resize by 30%. Dropshadow and position over moon. Duplicate and mirror. reposition over moon.

C/P Tulle 02. . Position under the frame so it is just peeking out. Duplicate and flip. Duplicate and rotate 90 degrees right. Position along the side of the frame. Duplicate and mirror. Now go back in with your eraser tool and remove anything that overlaps or you just don't like.

C/P Chandelier. Resize by 50%. Position UNDER just one of your top corner buttons so it looks like it is hanging. Dropshadow.

Open Flower 1. Adjust, Color Balance, Manual color correction. Source set to the tan color in your flower. Target to a dark red. C/P onto your tag. Resize by 20%. Duplicate and position slightly up and to the right of the original.

C/P Flower 03. Resize by 10%. Duplicate a few times (I used a total of 4) and position under the red roses.

C/P Leaf. Resize by 10%. Duplicate and change layer property to multiply. Merge down. Duplicate a few time and position under the roses.

C/P Key. Resize by 20%. Position under the red roses.

C/P spider. Resize by 30%. use your deform tool to position over the roses.. Adjust, Sharpness, Sharpen more.

Add your copyright and watermark.

Add your font. I added Glass and a Gradient glow of 3 the same color as my moon.

Vintage Cherry Tut (FTU)

Supplies used:

Vintage Girl by Screaming Demons. Get it at SATC.

Monochromatic Scrapkit by A Space Between. Get it HERE.

Font is called Fabulous 50's

EyeCandy 4000 Gradient Glow used on the font only

Thanks to Derika and Becca for the inspiration for the name :)

Ok so this is probably the simplest tut I will ever write LMAO. The tube itself is so stunning I did not want anything to over power it.

Start with a new image size 500 by 500

C/P Element 31. Resize by 50%. Dropshadow.

C/P Element 15. Resize by 75% Position so it sits on top the the ribbon.Dropshadow.  Use your lasso tool to select around the edges of the frame. (I kept some spaces open cause I liked the look) Add a new raster layer and C/P paper 14 into selection. Deselect. Move paper under your frame.

C/P Element 50. Resize by 50%. Position over the ribbon. Duplicate. Add Dropshadow to the original only. Duplicate again and mirror.

Go to adjust, Color Balance, Negative Image. Add Dropshadow.

C/P Element 43. Resize by 50% Rotate 90 degrees right. Add Dropshadow. Duplicate and move slightly down.

C/P Element 73. Resize by 30%. Duplicate 3 times and position at the base of the feathers. Dropshadow.

C/P Element 51. Resize by 30%. Position in the center of your black flowers. (I moved mine under 1 of the black flowers.) Dropshadow.

Add your font. If you choose add a gradient Glow of 3 in white. Add dropshadow.

That's it :) I would love to see your results:)

Gothic Waters Tut...

Oh...Guess what...Miss Gizzy inspired me to dust off my animating shoes. Just cause her animations are always sick ;P

Supplies Used:

Tube called Tattooed Gothic from Screaming Demon. Get her at SATC

Kit called Beautiful Gothic 2 Dark Waters by Addictive Pleasures. You can get it at her store Here.

Filters Used:

Eye Candy 4000 (Glass and Gradient Glow)(Font Only)

Greg's Factory Output Vol. II (Pool Shadow)

Font:

Selfish

Okay let's give it a go shall we?

Open up Paper 1. I resized my tag at this point so I wouldn't have to do it later. Resize the paper to 550 pixels.

Use your lasso tool to select just the water in your background. Selections, Load Save Selection, Save selection to disk. Just name it something you can remember. Deselect. (If you want to do the animation work now you can but I get everything in place first)

C/P Moon.Resize by 40%. I used manual color correction to change the moon to a white shade. Position over the moon on your background. (If you like the size of the moon just skip this step but I wanted my moon a big larger.)

C/P Swag. Resize by 50%. Move into upper left corner. Duplicate and mirror.

C/P Vine. Use your deform tool to stretch the vine horizontally to it covers the edge of your swag elements.

C/P Leaves. Resize by 50%. Duplicate 2 times for a total of 3. Position along the top of your tag.

C/P Tube. (I resized my by 65% but as you know it does depend on your tube)

Add dropshadow. I used -2,2,38,5

C/P Statue. Manual color correct. I used a darker gray color (If you use black you will not be able to see the details)

C/P Candles. resize by 30%.

C/P Cross. Resize by 20%

C/P Flower 4. Color correct to a dark purple color. Resize by 30%. Duplicate and position around the bottom of your cross and candles.

C/P Candles 2. Resize by 30%

C/P bowl. Resize by 30%

C/P Tree. Resize by 30% 2x. Position over your bowl.Duplicate, Mirror, and Position. Merge layer down. Use your eraser tool to erase any bits that hang over.

C/P Skull. Resize by 30%.

Add copyright and watermark.

If you don't wanna animate Skip to the last few steps for the text effects I used.

And for the animation...

Select your background layer. Duplicate 4 times for a total of 5. Selections your bottom layer. 

Selections, Load Selections we made earlier.

Apply Pool Shadow with these settings...DO NOT SELECT!!

Click on your next background layer and repeat only change BOTH diagonal settings to 50. KEEP SELECTED!!

Click on your next background layer (this should be the middle one)and repeat only change BOTH diagonal settings to 60. KEEP SELECTED!!

Click on your next background layer and repeat only change BOTH diagonal settings to 70. KEEP SELECTED!!

Click on your next background layer (this should be the top layer)and repeat only change BOTH diagonal settings to 80. Deselect.

Close the top 4 layers and copy merged. Paste into animation shop.

Now close the bottom layer and open layer 2. Copy Merged and pasted AFTER current frame.

Now close the 2nd layer and open layer 3. Copy Merged and pasted AFTER current frame.

Now close the 3rd layer and open layer 4. Copy Merged and pasted AFTER current frame.

Now close the 4th layer and open layer 5. Copy Merged and pasted AFTER current frame.

Edit, Select All. Then go to Animation, Frame properties and change to 20.

Back in PSP. Type out your name. 

Add Eye Candy 4000 Glass...

Then Gradient Glow...

Add the same drop shadow as before. I changed the opacity on my name to about 80 but depending on your color you don't have to.

Edit Copy (do NOT copy merged you only want to copy your name layer)

Back in Animation shop paste as a new layer. Be sure Propagate paste is selected. Drag your name to the FIRST frame of your taggie (If you add it to any other frame it will blink)

And voila. I hope you enjoyed this tut and I would love to see results for this one :P

Original Sin Tutorial

 

Supplies used:

Tube is by Screaming Demons and can be purchased at Scraps And The City HERE

Kit is called Original Sin and was made by A Taggers Scrap. You can also find it at SATC.

Lyrics are by the awesome band Genitorturers. The song is called 12 Days. You can visit their site HERE

Fonts:

Vrinda

Tension

No filters were used.

Open new image 800 x 800

C/P Glitter Bground 3.

C/P  frame 3.Using your lasso tool select all the way around the outside edge of the frame. Add new raster layer. Move under your frame layer. C/P paper of your choice into selection. Do Not Deselect. (I used paper 1). Using your font tool size 10 small or pixel type font type out your background text. (I used lyrics from a song called 120 days).Convert to raster layer. Now select your font layer on your layer palette . Selections, Invert, Delete. This will remove anything that sticks out. Dropshadow frame and font layers.

At this point I added my tube. You can always wait til the end of the tag but in this case I used the tube for placement of my elements. Use you eraser to clean up any bits sticking out of the frame. This doesn't have to be perfect since we are gonna cover most of the bottom of the frame. Dropshadow.

C/P Candles just under the left side of your tube. Resize by 75%. I used my deform tool to squish them together just a bit more. Add Drop Shadow.

Next I added Crop 1.Resize by 75%. I used my deform tool to make it run ALMOST parallel with the side of my frame. Dropshadow.

C/P Boot 2. Mirror. Resize by 50%. Dropshadow. Place over your Crop element.

C/P Candle 2. Resize by 75%. Dropshadow. Position UNDER your boot and crop layers. Duplicate. I used my deform tool to make the candle a but slimmer. Duplicate the slimmer candle 2 time for a total of 3. Place over the black candelabra layer in between the candles.

Open Whip 3. I used my lasso tool to select the pink handle. Use manual color correction to change to red. Or if you got pink in your tube just leave it pink :) Positions so the tails of the whip are sticking out UNDER the boot layer. Dropshadow.

Open Collar 2. Again I used my lasso and color correction but the pink will work fine if you want to skip it. Resize by 60%. Place just under your boot on the left side of tag. Dropshadow.

C/P Armband 2. Resize by 50%. Dropshadow. Position over the left side of the collar.

C/P Mask . Resize by 60%. Dropshadow. Place just slightly over the right side of collar.

C/P Cuffs 2. Resize by 60%. Use your deform tool to turn cuffs sideways. Dropshadow. Place so that the chain ends up overlapping your collar layer. 

C/P cap. Resize by 60%. Dropshadow. Place just under your mask and whip handle.

C/P Devil. Resize by 50%. Dropshadow. Move to the top of your layers. Position around the middle of your mask layer.

C/P Piercing. Resize by 60%.Position on the left side of your frame where there is background showing between the lines. Use your eraser tool along the line of the frame so it looks like the ring is passing through the frame. Dropshadow.

Add your copyright and watermarks.

Type out your name. Effects, 3d effects, Inner bevel....

 

Add Dropshadow.

I Duplicated my piercing layer from earlier. Resized by 75% and added it to my name. It was not needed but I that it would be a fun touch. 

Hope you enjoyed this tut :)