Gorjuss Spring tut

Supplies Used:

Ladybug Garden kit by Tasha's Playground. It is Exclusive to PTE.

Butterfly Nose tube by Suzanne Woolcott. I bought this tube back when AMI was still open but you can now get it direct from her store HERE. (Sorry this is to the ube pack I could not find the individual tube)

Font: TK Doodle

Eyecandy 4000 Gradient Glow (Font Only)
Mask of choice.

Open a new image size 650 by 250.

C/P Frame 3. Resize by 75%.

Open Paper 1. Crop the paper to remove the white border around the edges. Resize paper by 75%.

C/P paper under your frame layer.

C/P Flower Scatter. Resize by 

Select the inside of the frame with you magic wand tool. Selections, Modify, Expand by 2. 

Invert selection. 50%. Dropshadow, Duplicate, and Mirror. Position the flowers over the grass on your paper.

Hit delete on your paper & Flower layers.

Add dropshadow to the frame layer.

 C/P Clothes line. Resize by 30%. Dropshadow.Position so the bows in the line are just above the frame layer.

C/P Tree. Resize by 50%. Dropshadow. Position to the left of the frame. 

Duplicate tree and move slightly down. Use your eraser tool to remove any excess.

C/P Bush. Resize by 40%. Dropshadow. Position with your deform tool on a slight angle in the left corner of the frame. 

Duplicate bush and mirrror. Position next to the original.

C/P Flower Mug. Resize by 40%. Dropshadow and position near the center of the bushes.

C/P Bucket. Resize by 40%. Position over the mug only. Use your eraser to remove the inside edge of the bucket. Dropshadow.

C/P Watercan. Resize by 40%. Dropshadow and position over the flower bucket.

C/P Ladybug 2. Resize by 20%. Dropshadow. Duplicate. Position both near the bottom right corner of the bucket.

C/P Cloud. Resize by 50%. Dropshadow. Position to the top right of the frame.

C/P Sun. Resize by 50%. Dropshadow. Position over the cloud.

C/P Grass 2. Resize by 40%. Dropshadow and position near the bottom right corner.

C/P Flowermug. Resize by 40%. Position to one side of the grass. Dropshadow.

C/P Frog. Resize by 40%. Dropshadow. Position over the mug.

C/P Scatter. Resize by 20%. Dropshadow. Position over the grass.
Select your background layer. C/P  paper 2. Apply mask of choice and merge group.

Add your copyright and watermark.

Type out your font. Because the the way this font is I type my Caps out separate from the lower case. Then I stretch the lower case letters to make them larger. Convert to raster layer. Add Inner bevel of choice. Gradient Glow of 3 if needed. Dropshadow.

Thanks for trying my tut :P

La Bella Muerte tut...

Supplies Used:

Red Death tube by Screaming Demons. Get it at SATC.

Dream of Death kit by Addictive Pleasures. Get it HERE.

Font: VTKS Sonho
Eyecandy 4000 Gradient glow (Font Only)

Open a new image size 500 by 500.

C/P Frame. Resize by 75%.

Using your magic wand tool select the inside of the frame. Selections, Modify, Expand by 2.

Add a new raster layer. C/P Paper 1 into selection. Deselect and mover under frame.

Dropshadow frame.

C/P Moon. Resize by 75%. Dropshadow. Position under the paper layer.

C/P Leaves 2. Resize by 50%. Dropshadow and flip. Duplicate. Position along each side of the frame layer.

C/P Tree. Resize by 60%. Dropshadow. Position on the left side of the frame.

C/P Coffin. Resize by 75%. Dropshadow. Use your deform tool to position.

Duplicate coffin and change the layer property to Multiply.

C/P Mirror. Resize by 50% and mirror. Dropshadow. Use the deform tool to position under the coffin.

C/P Cross 4. Resize by 40%. Dropshadow. Use your deform tool to position. 

C/P Gravestone. Resize by 40%. Position over the right side of the coffin. Dropshadow.

C/P Gravestone 3. Resize by 30%. Duplicate and position next to the first grave.

C/P Candle. Resize by 20%. Dropshadow. Duplicate a few times and position over the graves.

C/P your tube. Dropshadow.

C/P Ivy. Resize by 75%. Dropshadow. Position near the bottom of your tube.

C/P Vine. Resize by 40%. Flip. Dropshadow. Position Over the gravestones. Duplicate and mirror.

C/P Flowers 2. Resize by 40%. Dropshadow. Position over the bottom of the cross.

C/P Crow. Resize by 30%. Dropshadow. Position at the bottom of the tag in the center of the red leaves.

C/P Gargoyle. Resize by 30%. Dropshadow. Duplicate and mirror. position UNDER the crow.

Type out your font. Apply inner bevel of choice. Apply Gradient glow of 3 in black. Repeat Gradient glow but change the color to red. Dropshadow.

C/P Rosary Beads. Resize by 50%. Dropshadow. Use your eraser if your like to remove a few of the beads to make it look like it is hanging from the cross.

Select your background layer. Selections, Select all. Paste paper 10 into selection. (You can always skip this step I just thought it made the font pop more :)

Add your copyright and watermark.

Femme Fatale tut...

 

Supplies used:

Secrets tube by Rene Kunert. Get it at Rebel-Dezigns.

Femme Fatale Scrapkit from Designs By Sarah. Get it at SATC

Font: Vladimir

Open a new image size 500 by 500.

C/P Frame 3. Resize by 75%.

Use your magic wand tool to select the inside of the frame. Selections, Modify, Expand by 3.

Add a new raster layer. C/P paper 5 into selection. Deselect.

Move paper under the frame layer. Duplicate and change layer property to Multiply.

Dropshadow frame.

C/P Curtain. Resize by 40%. I used my deform tool to make the curtain fit over half of the frame. Duplicate and mirror.

C/P Print 1. Resize by 75%. Position over curtain. Dropshadow. Duplicate and mirror.

C/P Leaves 1. Resize by 30%. Position on one side of the frame over curtains. Dropshadow. Duplicate and mirror.

C/P Chandelier. Resize by 30%. Dropshadow. Duplicate and mirror. position one on each side of frame. Merge down. Duplicate. Change layer property to multiply.

C/P Dress Stand. Resize by 40%. Dropshadow and position on the right side of frame. 

C/P Umbrella. Mirror. Resize by 40%. Position at the bottom of the dress stand. Dropshadow. Duplicate and change the layer property to multiply.

C/P Dress. Resize by 40%. Dropshadow. Use your deform tool to position over the handle of the Umbrella.

C/P Flower 7. Resize by 20%. Dropshadow. Duplicate a few times and line along the bottom of the dress.

C/P Ribbon 1. Resize by 40%. Dropshadow. Duplicate and mirror. Position along the bottom of the frame/flowers.

C/P Flower 6. Resize by 30%. Dropshadow and position over the ribbon on the right of the tag.

C/P Flower 8. Resize by 30%. Dropshadow. Position near the center of your black flowers. 

Duplicate Flower 8. Resize by 75% and position slightly over the original.

C/P Cat. Resize by 30%. Dropshadow. Position on the left of the frame.

C/P your tube. Dropshadow.

Type out your name along the side of the frame. (Make sure you change your text direction to Vertical right. It is new to the vector/floating option. Make sure you don't forget to change it back to horizontal when you are done :)

Add Inner bevel of choice.

Don't forget your copyright and watermark :P

 

Pinky Overdose tut...

 

Supplies used:

Cuteness Overdose tube by Zindy. Get it HERE 

Pinky Boo Easter kit by Bibi's Collection. Get it from SATC 

Mask of Choice

Font: Aquarelle

Eyecandy 4000 Gradient Glow (Font Only).

Open a new image size 500 by 500. 

C/P Element 23.

Use your lasso tool to select all the way around the frame. 

Add a new raster layer. C/P Paper  3 into selection.

Deselect and dropshadow frame.

C/P Element 44. Position under the paper layer so just one side of the wings stick out. Dropshadow.

C/P Element 7. Resize by 30%. Position to the top right of the frame. Dropshadow.

C/P  Element 84. Resize by 50%. Dropshadow. Duplicate and position one UNDER each side of the original flower.

C/P Element 11. Resize by 50%. Dropshadow. Use your deform tool to position UNDER the flower layers.

C/P Element 9. Resize by 30%. Dropshadow. Position over the top of the larger flower.

C/P Element 88. Resize by 50%. Dropshadow and position at the bottom of the frame. Duplicate and position next to the original.

C/P Element 66. Resize by 50%. Dropshadow and position just under the edge of the large flowers.

C/P Element 77. Resize by 50%. Mirror. Dropshadow. Position over the large flowers.

Select your background layer. C/P Paper 4. Apply mask of choice and merge layers.

Type out your name. Inner Bevel of Choice. Gradient glow of 5. Dropshadow.

Don't forget your copyright and watermark :P

Tags made using my Peetastic kit...

So I have gotten some AWESOME taggies this month from my New FTU Peeptastic kit and wanted to show em off.

This one is by my sis Magik. Visit here blog HERE

These are by my girl Penny from Tagger's Den

This one is from Anne at Tagger's Den

 

And these my girl Magik found on the Creative Chicks forum...

This one is also from Creative Chicks and she wrote a tut for it HERE 

 Thanks so much all of you for these cute taggies :P