Gothic Lovesong tut...

Supplies Used:

Gothic Heart kit by CBJ. This kit is exclusive to the Zindy Zone Shop.

Black Rose tube by Rene Kunert. Get it at her store Rebel-Dezigns.

Font: Engrossing Script

Filter: Eyecandy 4000 Gradient Glow (Font only)

Open a new image size 500 by 500.

C/P Frame 2. Resize by 75%.

Select the inside of the frame with your magic wand. Selections, Modify, Expand by 3.

Add a new raster layer. C/P Paper 11 into selection.

Add a new raster layer. C/P Paper 4 into selection. Change the layer opacity to 40.

C/P Love Words as a new layer. Resize by 40%. Selections, Invert, Delete. Change the opacity to 60.

Deselect. move your red frame to the top layer.

C/P Frame 3. Resize by 40%.

Dropshadow both frame layers.

C/P Heart trail. Resize by 40%. Image, Flip. Position in the lower left of the frame. Dropshadow.

C/P Ivy 2. Resize by 40%. Dropshadow. Position over the dots.

C/P Orchid Branch. Image, Flip. Resize by 20%. Position over the ivy. Dropshadow. Duplicate, Image, Flip, Mirror.

C/P Journal. Resize by 40%. Use your deform tool to position near the top of the ivy. Dropshadow.

Using the engrossing font size 18 type out your font over the tag. I used Lyrics for the Cure song Lovesong.

Convert to raster layer & Add Dropshadow.

C/P Lantern. Resize by 20%. Position over the key and bow on the tag. Use your eraser tool to remove any bits that are over the bow & Key (Tip: Lower the opacity of the lantern so you can see where to erase :) Dropshadow.

C/P Stitched Heart. Resize by 15%. Dropshadow. Position over the bottom right side of the lantern.

C/P Wings trails. Resize by 15%. Dropshadow. Position so the hearts fall around the lantern.

C/P Pearl Hearts. Resize by 10%. Dropshadow. Position over the center of the orchid branch on the top right of the frame.

C/P Bow Heart. Resize by 5%. Dropshadow. Position in the center of the bead hearts.

C/P Your tube. Dropshadow.

Type out your font. Apply Gradient Glow of 3 & Dropshadow.

Don't forget your copyright and watermark!

Skull Candy tut...

Supplies Used:

Skull Candy kit by Manipulated By Magik. Get it at ART.

New Boots tube by Rene Kunert. Get it from Rebel-Dezigns.

Font: DTC Funky M34

Filter: Eyecandy 4000 Gradient Glow (Font Only)

Open a new image size 500 by 500.

C/P Frame 2. Resize by 75%.

Select the inside of the frame with your magic wand. Selections, Modify, Expand by 3.

Add a new raster layer. C/P Paper 24 into selection. Deselect.

Dropshadow frame.

C/P Flame. Use your deform tool to decrease the width by about half. Dropshadow. Duplicate. Position flames over the left side of the frame.

C/P Roses. Resize by 50%. Dropshadow. Position over the flames on the left side of the frame.

C/P Roses 2. Resize by 50%. Dropshadow. Position over original roses.

C/P Sparkles 2. Resize by 75%. Dropshadow. Image, Mirror. Position about halfway up the left side of the frame.

C/P Zipped Heart. Resize by 30%. Dropshadow. Use your deform tool to position near the bottom of the roses.

C/P Star Trail. Resize by 50%. Dropshadow. Use your deform tool to position across the heart.

C/P Heartagram Brad. Resize by 40%. Dropshadow. Use your deform tool to position opposite the zipped heart.

C/P Skullfly. Resize by 30%. Dropshadow. Position near the center of the heartagram brad & Zipped Heart.

C/P Teddy & Skull. Resize by 30%. Dropshadow. Position over the center of the skullfly.

C/P your tube. Dropshadow.

Type out your font. Apply Inner Bevel of choice, Gradient Glow of 3, & Dropshadow.

Don't forget your copyright and watermark!

Garden Unbirthday Party Mini tut...

Supplies Used:

Alice 2 tube by Scott See. Get it at ART.

Fly Me To The Moon kit by Bibi's Collections. Available at SATC.

Font: SBC Curly

Filter: Eyecandy 4000 Gradient Glow (Font)

What I used:

Canvas size 500 by 500

Paper 5

Element 34 (65%)

Element 46 (50%, Duplicate then 50% again)

Element 21 ( 30%)

Element 37 (60%)

Element 1 (30%)

Element 26 (30%)

Element 7 (50%)

Element 18 (30%)

Element 42 ( 30%)

Element 49 (40%)

Element 50 (30%)

Element 48 (30%)

Element 17 (75%)

Element 9 (40%)

Element 35 (60%)

Element 40 (50%)

Element 4 (30%)

Gradient glow of 3 on font

Summer Breeze tut...

Supplies Used:

Al Rio Tube Bikini Girl 3. Get it at SATC.

Summer Breeze kit by Tasha's Playground. This is also available at SATC.

Font: Swan Song

Eyecandy gradient Glow 4000 (Font Only)

Open a new image size 500 by 500.

C/P Surfboard. Resize by 75%. Dropshadow. Duplicate. Use your deform tool to position angled under the original.

C/P Palm Tree. Resize by 75%. Dropshadow. Position to the right of the surfboard.

C/P Bubbles. Resize by 50%. Position under the palm tree. Dropshadow.

C/P Dots. Image, Rotate, Free Rotate, 90 degrees. Resize by 50%. Dropshadow. position over the bubbles.

C/P Sparkle 3. Resize by 50%. Image, Rotate, Free Rotate, 90 degrees. Dropshadow. Duplicate 2 times. position over the blue dots.

C/P Wave. Position near the bottom of the tree. Dropshadow.

C/P Seahorse. Resize by 30%. Use your deform tool to position under the wave. Dropshadow.

C/P Sand. Resize by 75%. Dropshadow. Duplicate and mirror.

C/P Pillow. Resize by 40%. Dropshadow. Duplicate. Position over the sand.

C/P your tube. Dropshadow. Position over the pillows.

C/P Cocktail 2. Resize by 30%. Dropshadow. Position near the edge of the pillow.

C/P Cocktail. Resize by 30%. Dropshadow. Position over Cocktail 2.

C/P Flip Flops. Resize by 30%. Position over the bottom of the cocktail glasses.

C/P Sandcastle. Resize by 30%. Dropshadow. Position near the bottom right of the sand.

C/P Cup Of Shells. Resize by 30%. Position under the corner of the sand castle. Use your eraser tool to remove the handle from the cup, you want just the shells showing. Dropshadow. Duplicate, Mirror and position under the other side of the castle.

C/P Crab. Resize by 30%. Dropshadow. Position to one side of the sand castle.

C/P Word art. Resize by 50%. Apply Eyecandy 4000 Gradient Glow of 3. Dropshadow.

Type out your font. Apply inner bevel of choice, Gradient Glow of 3, & Dropshadow.

Don't forget to add your copyright and watermark

Mermadia tut...

Supplies used:

Mermaid tube by Screaming Demons. Get it at SATC.

Magic Sea kit by Bibi's Collection. Also available at SATC.

Font: SP Pretty Purky

Eyecandy 4000 Gradient Glow (Font only)

Open a new image size 500 by 500.

C/P Element 35. Resize by  55%.

Select the inside of the frame with your magic wand. Selections, Modify, Expand by 20.

Add a new raster layer. C/P Paper 10 into selection.

Deselect.

C/P Element 60. Resize by 75%. Dropshadow. Position over the center of the frame layer.

C/P Element 90. Resize by 50%. Position near the bottom right of the frame.

C/P Element 96. Resize by  50%. Position over the bottom left of the frame.

C/P Element 94. Resize by 60%. Position over the left of the frame. Dropshadow.

C/P Element 31. Resize by  50%. Position along the curve of the wave. Dropshadow.

C/P Element 18. Resize by 50%. Dropshadow. Duplicate and mirror. Position both at the bottom of the tree.

C/P Element 4. Resize by 50%. Position to cover the bottom of the frame.

C/P Sand. Resize by 50%. Dropshadow. Change the layer opacity to around 60. Position under one side of the frame. Duplicate and mirror.

Select your top layer. C/P your tube. Dropshadow.

Select the paper layer. Type out your font. Apply inner bevel of choice, Gradient Glow of 3, Dropshadow.

Don't forget your copyright and watermark!