Rebel Summer (FTU kit &TUBE!!!)

Supplies Used:

Lana tube by Uchy. This tube is FREE!! You can get it from being a member during the Birthday Bash at Rebel-Dezigns.

Summer Days Scrapkit  by my sister from another mister Miss Magik :) Get it from her blog HERE.

Filter: Eyecandy Gradient Glow (Font only)

Font: Sheer Grace

Open a new image size 500 by 500.

C/P Life Preserver.

Using your magic wand select the inside of the life preserver. Selections, Modify, Expand by 3.

Add a new raster layer. C/P Paper 7 into selection. Deselect.

C/P Wave. Resize by 75%. Image, Rotate, Free Rotate 90 degrees left. Position to one side of the frame. Dropshadow. Duplicate and mirror.

C/P Sand. Resize by 75%. Position at the bottom of the inside of the life preserver. Dropshadow. Use your eraser tool to remove any of the sand outside the frame.

C/P Doodle. Resize by 75%. Dropshadow. Position over the left side of the frame.

C/P Beach ball. Resize by 40%. Dropshadow. Position at the bottom of the doodle.

C/P Weeds. Resize by 75%. Dropshadow. Position over the right side of the frame.

C/P Doodle Rings. Resize by 20%. Dropshadow. Position at the bottom of the weeds.

C/P Flower 5. Resize by 20%. Dropshadow. Position over the doodle rings.

C/P Starfish. Resize by 20%. Dropshadow. Position over the flower.

C/P Shell. Resize by 10%. Dropshadow. Duplicate a few times and position around the starfish.

C/P Your tube. Dropshadow.

Type out your font. Apply Gradient Glow of 3 & Dropshadow.

Select the bottom layer of your canvas. C/P Glitter Scatter. Dropshadow.

Don't forget your copyright & Watermark!
I ended up resizing my tag to 400 pixels but if you do that make sure to sharpen any elements as needed :)

Sunflowers in the tropics tut (FTU)

Supplies Used:

The Sungirl tube by Zindy. Get it HERE.

Summer Cocktail kit by Pink Candy Designs. You can get it from her blog HERE.

Font: Satisfaction.

Got a super duper easy one for you :)

Open a new image size 500 by 500.

C/P Frame 2. Resize by 75%.

Using your magic wand select the inside of the frame. Selections, Modify, Expand by 3.

Add a new Raster layer. C/P Paper 3 into selection.

C/P Sun 2 as a new layer. Position near the top left under the frame.

C/P Your tube.

Selections, Invert. Hit delete on both the sun layer and your tube. Deselect. Move the frame to the top layer.

Dropshadow tube & Frame.

C/P Shells Chain. Resize by 55%. Position over the ribbon on the frame. Dropshadow. Duplicate. Image, Rotate, Free Rotate 90 Degrees. Position over the vertical ribbons on the frame.

C/P Bubbles 2. Position over the left side of the frame. Dropshadow.

C/P Palm Frond. Resize by 40%. Dropshadow. Duplicate and mirror. Position both palm fronds along the bottom left of the circle in the frame.

C/P Flowers 2. Resize by 40%. Dropshadow. Position over the bottom of the palm fronds.

C/P Decor. Resize by 40%. Dropshadow. Position at the bottom of the roses.

Type out your name over the top right of the frame. Apply inner bevel & Dropshadow of choice.

Don't forget to add your copyright & watermark!

Angel Feathers tut..

Supplies Used:

Angel in pink tube by Zindy. Get it HERE.

Feathered Love kit by Abstract Creations. Get it at PTE. (Currently in the new release section)

Eyecandy 4000 Gradient Glow (Font Only)

Font: AL Sandra

Open a new image size 500 by 500.

C/P E47. Dropshadow.

Use your selection tool to select around the inside of the window. 

Add a new raster layer. Flood fill with a light blue.

Add a new raster layer. C/P Paper 3 into selection. Deselect. Change the layer property to Luminance.

Move frame layer to the top of the layer palette.

C/P E40. Resize by  50%. Position near the top right of the window. 

C/P E7. Resize by 50%. Position under the cage.

C/P E39. Image, Mirror. Resize by 50%. Dropshadow. Position near the bottom right of the window.

C/P E49. Resize by 30%. Dropshadow. Position to the left of the trinket box.

C/P E33. Resize by 50%. Dropshadow. Position over the bottom of the angel statue.

C/P E41. Resize by 50%. Dropshadow. Position over the bottom of the gifts/Angel.

C/P E42. Resize by 30%. Dropshadow. Position over the bottom left of the violin.

C/P Your tube. Dropshadow. Position over the left side of the window.

C/P E4. Resize by 75%. Position over the bottom of your tube.

C/P E5. Resize by 50%. Adjust, Color Balance, Manual color Correct Source to white, Target to light pink. Duplicate. Dropshadow original only.

C/P E32. Resize by 10%. Dropshadow. Duplicate a few times and position around the white flowers.

Type out your font. Apply inner bevel of choice. Add Gradient Glow of 3 & Dropshadow.

Don't forget your copyright and watermark!

Time & Memory tut...

Supplies Used:

The Pretty Rose tube by Zindy. Get it HERE.

Beauty Of Time kit by Abstract Creations. Get it at PTE (Coming Soon.)

Fonts: Janet & Impact

Filters: Eyecandy 4000 Gradient Glow & HSB Noise

Open a new image size 500 by 500.

C/P Element 12. Resize by 75%. Dropshadow.

Use your selection tool to select the inside of the frame.

Add a new raster layer. C/P Paper 9 into selection.

Add a new Raster layer. C/P Paper 7 into selection. Go to effects, Artistic Effects, Sepia Toning at 50%. Change the layer property to luminance.

C/P Element 28 into selection.

C/P your tube into selection.

Deselect. Dropshadow Diamond layer & Your tube.

If you are using the same tube as me use your lasso tool to select around only the roses of the tube. Go to adjust, Color Balance, Manual Color Correct. Set the source to a gray color from the rose and your target to a light purple. Deselect.

Click the frame layer in your layer palette.

C/P Element 29. Image, Rotate, Free Rotate 90 degrees. Resize by 50%. Position over the right side of the frame. Dropshadow. Duplicate and change the layer property to Hard Light.

C/P Element 18. Resize by 50%. Dropshadow. Use your deform tool to position starting at the top right corner.

C/P Element 25. Resize by 50%. Dropshadow. Image, Mirror. Position about halfway down the right side of the frame.

C/P Element 9. Resize by 30%. Dropshadow. Position just under the curve of the leaf doodle.

C/P Element 10. Resize by 30%. Image, Mirror. Position over the bottom right of the clock.

C/P Element 13. Image, Mirror. Resize by 30%. Dropshadow. Position starting at the bottom right of the luggage.

C/P Element 2. Image, Mirror. Resize by 20%. Dropshadow. Position over the basket.

Using the impact font type out the word "TIME". Start a 2nd line and type out the word "MEMORY". Convert to raster layer. Apply inner bevel of choice 2 times. Apply HSB noise with the following settings:

Apply Eyecandy 4000 Gradient Glow of 3 set to fat in a contrasting color.

Add dropshadow of choice.

Using the contrasting color type out "Moves in one direction" between your 2 existing words. Type out "In another" under the large words. Convert to rater layer. Apply Eyecandy 4000 Gradient Glow of 3 in your original font color. Dropshadow.

Don't forget to add your copyright and watermark!

Not That Desperate tut...

Supplies Used:

Emo Meow kit by Bibi's Collection. Get it at PFD.

Aivelin tube earnable through quests at PFD.

Simone Template 129. Download from Creative Misfits.

Eyecandy 4000 Gradient Glow.

Font: Sloop.

Ok we will start at the bottom of the template and work our way up...

Delete the background & Copyright layers.

Select raster 7. Selections, Select all, Float. Add a new raster layer. C/P Paper 1 into selection. Deselect. Close or delete Layer 7.

Select Raster 8 in your layer palette. Selections, Select all, Float. Add a new raster layer. C/P Paper 11 into selection. Deselect. Close or delete Layer 8.

 Select Raster 2 in your layer palette. Selections, Select all, Float. Add a new raster layer. C/P Paper 9 into selection. Deselect. Close or delete Layer 2.

 Select Raster 5 in your layer palette. Selections, Select all, Float. Add a new raster layer. C/P Paper 10 into selection. Deselect. Close or delete Layer 5.

Select raster 10 in your layer palette. Use your magic wand tool to select all of one of the colors. Add a new raster layer. Flood fill selections with a color from your tube. Deselect.

Use your magic wand tool on raster 10 to select the opposing color. Add a new raster layer. Flood fill selections with a contrasting color from your tube. Deselect.

Close or delete layer 10.

 Select Raster 4 in your layer palette. Selections, Select all, Float. C/P Paper 1 as a new layer. Selections, Invert. Hit delete on the paper layer. Close or delete Layer 4.

 Select Raster 3 in your layer palette. Selections, Select all, Float. C/P Paper 2 as a new layer. Selections, Invert. Hit delete on the paper layer. Close or delete Layer 3.

C/P Element 11. Resize by 50%. Position at the top of your Green checkered paper.Dropshadow.

 Select Raster 6 in your layer palette. Selections, Select all, Float. Add a new raster layer. C/P Paper 5 into selection. Deselect. Close or delete Layer 6.

 Select Copy of Raster 6 in your layer palette. Selections, Select all, Float. Add a new raster layer. C/P Paper 5 into selection. Deselect. Close or delete Copy of Layer 6.

 Select Raster 9 in your layer palette. Selections, Select all, Float. C/P Paper 7 as a new layer. Selections, Invert. Hit delete on the paper layer. Close or delete Layer 9.

C/P Element 24. Position across your tag. Dropshadow.

Select Raster 13. Adjust, Add/Remove noise with the following settings:

Then Gradient Glow of 3 with the following settings:

Add dropshadow. Position Word Art as desired.

C/P Element 22. Resize by 50%. Position on the bottom right side of the tag. Dropshadow.

C/P your tube over the vertical papers on the left. Dropshadow.

C/P Element 52. Resize by 50%. Dropshadow. Position over the bottom right of the tag.

C/P Element 48. Resize by 30%. Dropshadow. Position over the hearts.

C/P Element28. Resize by 30%. Dropshadow. position at the bottom of the hearts.

Type out your font in black. Repeat add noise and Gradient glow with the same settings as before.

Don't forget your copyright and watermark!