Hellraiser Tut...

Supplies used:

Tube by Ed Mironuik. Get all his tubes at CDO.

PTU Scrapkit Hellraiser by Witchy's heart. Get it HERE.

I also used the freebie sample from her blog Creations By Witchy's Heart

Fonts: Bleed and Cenobyte

Filters: Eyecandy 4000 Drip (Glass and Gradient Glow for font)

Animation made by the most wonderfulest Bestest awesomest Rene Kunert. You can get it from her forum HERE.

Open a new image size 500 by 500

C/P Paper 2 and position as you like.

Type out Welcome to hell on the wall with the Bleed font. Change the opacity to around 74. Apply Eyecandy 4000 with these settings...

C/P Bench. Resize by 50% and position in lower right corner.

C/P Door #1. Resize by 40%. Position to the left of the tag.

C/P Candle #1. Resize by 75% and position to the far left of the door.

C/P Your tube.

C/P Hook with chain.Resize By 50%. Use the deform tool to position.

C/P Hook With Chain #1. Resize by 50%. Use the deform tool to position in the top left corner.

C/P Hook with Chain #2. Resize by 50%. Use your deform tool to position in top right corner.

C/P Candle #3. Resize by 20%. Position behind the bench. Duplicate 2 times for a total of 3 and stagger them slightly.

C/P Skull Candle. Resize by 30%. Position in the bottom right corner.

C/P Candle #3. Resize by 5%. Duplicate several times and position along the edge of the bench (Keep in mind if you are animating to leave a bit of room between the flames.)

C/P Mask. Resize by 10%. Position just behind the door so it hangs from the top of the tag.

I added several small elements to the bench...

Lament Configuration (Box #2) (10%) (Duplicate and change property to multiply)

Bloody Knife (25%)

Spiked Cuff (15%)  (Duplicate and change property to multiply)

Jagged Blade (25%)

Handcuffs 2 (15%)

Razor (10%)

If you are not animating you can skip ahead add your name and save. The tag will look like this....

 Make sure your tube is the top layer. Close your tube layer.

In animation shop make sure propagate paste is clicked.

C/P Merged into animation shop. Duplicate so you have a total of 14 frames. Click the first frame then select all.

Back in PSP open your flame. Resize by 20% (Make sure all layers is checked)

Make sure all layers all closed but 14. C/P merged into animation shop as a new animation.

Close layer 14 and open Layer 13. C/P Merged and paste into animation shop after current frame.

Close layer 13 and open Layer 12. C/P Merged and paste into animation shop after current frame.

 Close layer 12 and open Layer 11. C/P Merged and paste into animation shop after current frame.

 Close layer 11 and open Layer 10. C/P Merged and paste into animation shop after current frame.

 Close layer 10 and open Layer 9.  C/P Merged and paste into animation shop after current frame.

  Close layer 9 and open Layer 8.  C/P Merged and paste into animation shop after current frame.

 Close layer 8 and open Layer 7.  C/P Merged and paste into animation shop after current frame.

 Close layer 7 and open Layer 6.  C/P Merged and paste into animation shop after current frame.

 Close layer 6 and open Layer 5.  C/P Merged and paste into animation shop after current frame.

 Close layer 5 and open Layer 4.  C/P Merged and paste into animation shop after current frame.

 Close layer 3 and open Layer 2.  C/P Merged and paste into animation shop after current frame.

 Close layer 2 and open Layer 1.  C/P Merged and paste into animation shop after current frame.

Drag frame 1 of your flame to frame 1 of your tag and position over the candle flame.

Hit undo on the flame and drag frame one to frame one again.  Repeat until about half the candles are lit. 

Reverse the frames of you flame and repeat on the rest of the candles.

Back in psp open you tube. Copy tube and paste as a new animation in animation shop.

Drag your tube to frame 1. As long as you have propagate paste checked it will show up in all the frames.

Back in PSP type out your name in the Cenobyte font. Add eyecandy 4000 Glass. Add Gradient Glow of 3. 

Copy your name and paste as a new animation in animation shop.

Drag to frame 1 of your tag.

Don't forget to add your copyright and watermark!

I.D.G.A.F tut..

Supplies used:

Hard Love Scrapkit from Bibi's Collection. Get it HERE

Celinart Prepaid tube #3. You can still get her in the VIP area if you missed out at SATC

Template 003 by my sister from another Mister Magik. Grab it from her blog Manipulated By Magik

Font: GFY Otep

Filter: EyeCandy 4000 HSB Noise and Glass.

Alright let's start on the template.

Delete the copyright and background layers.

Click the bottom right Circle. Selections, Select all, Float. Add a new raster layer. C/P Paper 6 into selection. Selections, Modify, Expand by 5. Add a new raster layer and floodfill with black. Deselect and move below the paper layer.

Go to adjust, Add/Remove noise. Add noise with these settings...

Click your paper layer and merge down. duplicate flip and mirror.

Delete top left and bottom right circle layers.

Select the center rectangle. Go to Adjust, Color Balance, manual color correct. Change from blue to a dark purple.

Select the center frame. Go to Adjust, Color Balance, manual color correct. Change from blue to a dark red.

Add Eyecandy 4000 HSB Noise with these settings...

Add EyeCandy 4000 Glass....

I chose not to use the triangle and just deleted those layers.

C/P Close up on the right side of the tag. Click the rectangle. Selections, Select all, Float. Invert and hit delete on the tube.

Change layer opacity to Luminance (L).

Select the bottom left boxes. Selections, Select all, Float. Add a new raster layer.

C/P Paper 2 into selection. Selections, Modify, Expand by 5. Add a new raster layer and floodfill with black. Deselect and move below the paper layer.

Go to adjust, Add/Remove noise same settings as before. 

Click your paper layer and merge down. duplicate flip and mirror.

Delete top left and bottom right box layers.

C/P your tube. Remove any bits that hang over the frame. Add dropshadow.

C/P Element 44 (Brass Knuckles) Duplicate. On top layer change the layer property to Multiply. Position with your deform tool.

C/P Element 33 (Skulls) over the brass Knuckles.

C/P Element 1. Mirror and Position in the top corner of the frame.

Select Side words Background.  Go to Adjust, Color Balance, manual color correct. Change from white to  Red.

 Select top/bottom words Background.  Go to Adjust, Color Balance, manual color correct. Change from white to  Red.

Select F-Bomb. Go to Adjust, Color Balance, manual color correct. Change from Blue to  Purple.

Add HSB Noise same setting as before.

Add Glass same setting as before.

Dropshadow.

Merge all 3 F-Bomb layers together. Use you deform tool to stretch the word and make it larger. 

Go to Adjust, Sharpness, Sharpen more.

Add your name.

Add Glass as before.

Don't forget your copyright and watermark.

Devilish Tut...

Supplies Used:

Devilish B*itch kit by Coyotie designs. Get it at AIL

Demonia tube by Sky Scraps. Get it at SATC

Mask by Rose from Creative Misfits

Eyecandy 4000 Glass and Gradient Glow.

Font: Zenda

Open a new image size 500 by 500.

C/P Frame 2. Rotate by 90 degrees. Resize by 80%.

Using your magic wand select the inside of the frame.

Selection, Modify, Expand by 2. 

Add a new raster layer. C/P Paper 4 into selection. Move under the frame but keep selected.

C/P your tube as a new layer.

Apply eyecandy 4000 glass with these settings...

C/P Flame as a new layer.

Selections, Invert, Delete on both the tube and flames. Deselect.

Dropshadow Frame, tube, And Flames.

C/P Tattoo. Resize by 80%.

C/P Claws. Resize by 20%. Position so it is between the flowers. Dropshadow.

C/P star 1. Resize by 50%. Duplicate and position both under tribal flowers.

C/P Glitter Trail 2. Resize by 50%. Mirror and position over top top left of the frame.

C/P Glitter trail 1. Resize by 50% and position over red glitter trail.

Select your background layer. 

C/P Paper 5 and add your mask.

C/P Wire. Rotate by 90 degrees. Resize by 85%. Use your deform tool to position.

Type out your font and add inner bevel of choice. 

Add gradient glow of 3.

Don't forget copyright and watermark.

Rockin' And Rollin'

Supplies used:

Roller Girl Scrapkit made by my kickass girl Tasha's Playground. It will be available soon at PTE.

Tube by Arthur Crowe with was a free Gift. She is no longer available but I am sure many of you have here. She came from  SATC.

Filter: Eye Candy 4000 Gradient Glow (Font Only)

Fonts: Waterbrush Rob and SBC Jill's Place

Ok here we go...

Open a new image size 500 by 500

C/P Frame 2. Resize by 85%.

Use your magic wand to select inside the frame. Selections, Modify, Expand by 5.

C/P Paper 13. Selections, Invert, Delete. Invert Selection back to the original.

C/P Skyline. Position as you like and go to selections, Invert, Delete. Deselect.

Move both the paper and the skyline under the frame.

Dropshadow Skyline.

C/P your tube. Use your eraser to remove any bits that stick out from the bottom.

Dropshadow frame and tube.

C/P Scatter. Resize by 85% Position over the frame. (I actually used only one side of the scatter and duplicated and mirrored but it will look close to the same and be easier by just resizing and positioning)

Using your SBC Jill's Place font type out the lower part of your text. Add inner bevel of choice and Gradient glow of 3.

Now above that font use your Waterbrush Rob font just reverse the colors. Add Inner Bevel and gradient glow as before.

Open up Flame. Use your magic wand to select around the OUTSIDE of flame. Go to selections, Modify, Contract by 1 pixel. Selections, Invert. Add a new raster layer and C/P Paper 14. Deselect and move UNDER the flame.
Edit, Copy Merged. Paste onto your tag as a new layer. Resize by 50%. Position Behind your wordart on the right. Dropshadow Flame.
Duplicate, Mirror and position about halfway up the left side of your frame.
C/P Sparkle 2. Position under your wordart.
C/P Ipod. Resize by 75% and mirror. Position over the flame on the left side. Dropshadow.
C/P Ticket. Resize by 50%. Use your deform tool to position. Dropshadow.
Open Badge. Use your magic wand to click the black square. Selections, Modify, Expand by 1. C/P your tube and resize as needed so the face fits in the selection. Selections, Invert. On your tube layer hit delete.
Copy Merged. Paste onto your tag. Resize by 50%. Position with the deform tool and add dropshadow.
C/P Skate. Resize by 50%. Add Dropshadow.
Add your name with the waterbrush font and repeat the steps as before.

Don't forget your copyright and watermark :)

Alice's Wonders Mini Tut

Supplies used:

Malice tube by my girl Justice Howard. Available at PSPtubes.net

Alice's Wonders kit by Foxy's Designz. I bought this kit at SATC but you can get it from Foxy's store HERE.

Font: Beyond Wonderland

Here is what I used:

Element 32 (Frame) (Rotate 90 degrees and resize 65%)

Element 37 (Keyhole)

Paper 7

Element 40 (Blue Scatter) (50%)

Element 35 (Piano) (75%)

Element 20 (Green Mushrooms)  (30%) (times 3)

Element 1 (Hat) (10%)

Element 5 (Flowers) (30%) (times 3)

Element 24 (Grass) (30%) (times 3)

Element 15 (Cards) (30%)

Element 12 (Teacup) (20%)

Element 3 (Rabbit) (20%)

Element 7 (Hearts) (20%) (times 4)

Element 36 (Key) (50%)